I've follow step by step the Debugging 3rd party modules and now my property module is linked to source code but I'm no able to stop the debug at the break point. I've set one break point to the default.ascx.vb in init page event but never is reached! You can see in attached file a screen shot!

Any help!?

BlankModule setup? I've Installed Private Assembly and Updated the module definitions to the copyed source version. I don't understand about codebehind model you used in source version, if I add a button to ascx file in project view and double click on it to add code, the vb code is added to ascx file and not to separate file .vb! If I put a break point on the vb code added in ascx file then I'm able to debug. I'm confused about your source version. All code is performed in Ventrian.PropertyAgent DLL and I'm no able to change nothing in source version.

I'm doing something to wrong?

Hi, You report two link:

http://vladan.strigo.net/projects/blankmodule-dnn-dev.-enviroment-setup-for-visual-studio-2005/setting-up-blankmodule-v.1.0/?PHPSESSID=9484e2a199821e38ff5141930495240c

and this in Debugging 3rd party modules article,

http://blogs.speerio.net/peerio/Speerio+My+Modules+VSNet+Solution+For+DotNetNuke.aspx

but both are unreachable!

Yes Scippy, those links are broken!
But there is another link around this: http://www.mitchelsellers.com/blogs/articletype/articleview/articleid/169/pageid/84.aspx
About this I have a question for Scott:
I'm able to debug Your module only Attaching to Process as described in this link but in this way to any amendment should make him stop and rebuilding the module and restart the site with an inevitable slowdown in work.
You make debugging in the usual way or you can indicate a better alternative to this?